Drop untagged frame. Press “Space” key to select drop or forward the untagged frame.
3. Select <Save> to save the configuration.
VLAN Configure interface
Create VLAN Group
Create Port-Based VLAN
1.Select <Edit>.
2.VLAN Name: Type a name for the new VLAN, ex: VLAN01.
3.Group ID: Type the VLAN group ID. The group ID rang is from 1 to 4094.
4.Member: Press ”Space” key to change the member value. There are two types to selected:
a.Member: the port is a member port.
b.NO: it means that port is NOT a member port.
5.Press “ESC” key to go back action menu line.
6.Select <Save> to save the configuration.
NOTE: If you had configured the trunk groups, you can see it (ex: TRK1, TRK2…) in the port list. You also can configure the trunk group as the VLAN member.
29
