Lexmark 248X, 249X manual Set Multiple Print Positions, Move to the Left, Move to the Right

Name	Dec	Hex	Description
ESC DLE @	27 16 64 pN	1B 10 40 pN	Set Multiple Print Positions
	a1 a2 p1 p2	a1 a2 p1 p2	Moves the print position to the right or left, as an
	p3 p4	p3 p4	absolute or relative print position.
			pN=0 to 127
			a1=0 (absolute print position)
			a1=1 (relative print position)
			a2=0 (move to the left (backward))
			a2=1 (move to the right (forward))
			The character pitch determines the distance
			represented by the tab (distance from the center of
			one dot to the center of the next dot).
			Pitch	Shift Increment
			10 cpi		1/120
			12 cpi		1/144
			15 cpi		1/360
			17.1 cpi		1/411
			20 cpi		1/480
			The values for p1, p2, p3 and p4 must be entered as
			four-digit ASCII numbers (use leading zeros if
			necessary), separated by commas, and in
			ascending order.
			To calculate the value, multiply the position for
			which you want to set a tab by the pitch increment
			of shift, and then subtract one from the product.
			For example, to set a tab for 2" from the left margin
			using 12 cpi pitch, multiply 2 by 144, and then
			subtract 1. The value would be 0287.
			Maximum values are as follows:
			Pitch	2480	2481
			10 cpi	959	1631
			12 cpi	1151	1956
			15 cpi	1339	2447
			17.1 cpi	1643	2795
			20 cpi	1917	3261
ESC % F	27 37 70 n1	1B 25 46 n1	Move to the Left
	n2 n3 n4	n2 n3 n4	See the command ESC ETX ... CR on page 86 for
			instructions on calculating the value for n1...n4.
			(Use the same pitch increment of shift values as the
			ESC ETX ... CR command.)
ESC % E	27 37 69 n1	1B 25 45 n1	Move to the Right
	n2 n3 n4	n2 n3 n4	See the command ESC ETX ... CR on page 86 for
			instructions on calculating the value for n1...n4.
			(Use the same pitch increment of shift values as the
			ESC ETX ... CR command.)
ESC -	27 45	1B 2D	Begin Uni-directional Printing
ESC =	27 61	1B 3D	End Uni-directional Printing

Section 5: OKI Microline Emulation Mode Printer Commands 87