Lexmark 248X, 249X manual Set Line Spacing to 1/8 Inch, Set Line Spacing to 7/72 Inch

•ESC R (Set Default Tabulation Stops) and ESC B 0 will clear all vertical tab stops.

•Set the tabulation stops in ascending order (n1.....n64).

•The last digit in the sequence must be a 0 to terminate the command.

Line Spacing

Set Line Spacing to 1/8 Inch

This command (ESC zero) sets the line spacing at 1/8 inch between each line, which is 8 lines per inch (lpi).

Format ESC 0

Decimal 27 48

Hex 1B 30

Set Line Spacing to 7/72 Inch

This command sets the line spacing at 7/72 inch between each line, which is 10.3 lpi.

Format ESC 1

Decimal 27 49

Hex 1B 31

Activate Line Spacing for Text

This command activates the line spacing designated by the Set Line Spacing for Text (ESC A) printer command.

Format ESC 2

Decimal 27 50

Hex 1B 32

Section 3: IBM Emulation Mode Printer Commands 57