Lexmark 249X Set Page Length in Inches, Set Page Length in Lines, Select Skip Over Perforation

Vertical Movement

Name	Dec	Hex		Description
ESC G	27 71 Hn Ln	1B	47 Hn Ln	Set Page Length in Inches
				Sets the page length in increments of 1/2" x the
				values of Hn Ln.
				The values for Hn and Ln should be between 00
				and 99. For lengths less than 4.5", Hn = 0.
ESC F	27 70 Hn Ln	1B	46 Hn Ln	Set Page Length in Lines
				Sets the page length in increments of
				line pitch x the values of Hn Ln.
				The values for Hn and Ln should be between 00
				and 99. For values less than 10, Hn = 0.
ESC % S 1	27 37 83 49	1B	25 53 31	Select Skip Over Perforation
				Skips an inch from the bottom of one page to the
				top of the next.
ESC % S 0	27 37 83 48	1B	25 53 30	Cancel Skip Over Perforation
FF	12	0C		Form Feed (with carriage return)
				Advances the paper to the top of the next page.
LF	10	0A		Line Feed (with carriage return)
				Advances the form one line.
ESC DC2	27 18	1B	12	Graphics Line Feed (without carriage return)
				Advances the form one line without returning to
				the left margin. Allows you to overstrike a line of
				printing and to create special effects like double
				underlines.
ESC ? n :	27 63 n 58	1B	3F n 3A	Carriage Return/Feed Selection
				Value of n	Operation
				33	Carriage return only
				34	Forward line feed, no carriage return
				35	Forward line feed w/carriage return
				48	Reverse line feed, no carriage return
				49	Reverse line feed w/carriage return
ESC % 5 n	27 37 53 n	1B	25 35 n	Perform n/144" Line Feed
				0 < n < 127
ESC VT	27 11 Hn Ln	1B	0B Hn Ln	Skip Down Select Number of Lines
ESC LF	27 10	1B	0A	Reverse Line Feed
ESC 6	27 54	1B	36	Set Line Spacing to 1/6"
ESC 8	27 56	1B	38	Set Line Spacing to 1/8"
ESC % 9	27 37 57 n	1B	25 39 n	Set Line Spacing to n/144"

88 Section 5: OKI Microline Emulation Mode Printer Commands