Lexmark 249X, 248X manual Initial Values Description

init sets the printer to user-defined or factory settings. The value for init can be:

Initial Values	Description
	Initializes printer to user-defined settings. The download font
	remains unchanged. If parameters are specified, they over-
	write the default settings. If the emulation mode is changed,
0	the download font is initialized. This command only copies
	data from the selected macro, add parameter changes, if any,
	and store in working RAM; the data stored in the macro’s non-
	volatile RAM is not affected.
	Initializes printer to user-defined settings. The download font
	is initialized. If parameters are specified, they overwrite the
1	default settings. This command only copies data from the
	selected macro, add parameter changes, if any, and store in
	working RAM; the data stored in the macro’s non-volatile
	RAM is not affected.
	Initializes printer to factory settings. The download font
	remains unchanged. If parameters are specified, they over-
	write the default settings. If the emulation mode is changed,
4	the download font is initialized. This command only copies the
	default settings from ROM, add parameter changes, if any, and
	store in working RAM; the data stored in the macro’s non-vol-
	atile RAM is not affected.
	Initializes printer to factory settings. The download font is ini-
	tialized. If parameters are specified, they overwrite the default
5	settings. This command only copies the default settings from
	ROM, add parameter changes, if any, and store in working
	RAM; the data stored in the macro’s non-volatile RAM is not
	affected.
	Initializes printer to user-defined settings. The download font
	is initialized. If parameters are specified, they overwrite the
	default settings. This command changes data stored in the
254	selected macro. It copies data from the selected macro, add
	parameter changes, if any, and store in working RAM and in
	the selected macro. It also changes the default macro to the
	value of parm 3.
	Initializes printer to default settings. The download font is ini-
	tialized. If parameters are specified, they overwrite the default
255	settings. This command changes data stored in the macro’s
	non-volatile RAM. It copies default settings from ROM, add
	parameter changes, if any, and store in working RAM and all
	macros. It also sets the default macro to Disable.

22 Section 2: Set Initial Conditions (SIC) Command