Lexmark 248X, 249X manual Pin Graphics Mode 248x only, Change Graphics Mode Command

Graphics Print Modes

Name	Dec	Hex	Description
ESC ^	27 94 m Ln	1B 5E m Ln	9-Pin Graphics Mode (248x only)
	Hn data	Hn data	Prints 9-pin bit-image graphics.
			m=0 Normal density (60 dpi)
			m=1 Dual density (120 dpi)
			m=2 High speed dual density (120 dpi)
			m=3 Quadruple density (240 dpi)
ESC ?	27 63 n1 n2	1B 3F n1 n2	Change Graphics Mode Command
			Changes the graphic mode assigned to a graphics
			mode command.
			n1=K Normal density
			n1=L Dual density
			n1=Y High speed, dual density
			n1=Z Quadruple density
			n2 0, 1, 2, 3, 4, 6, 7, 32, 33, 38, 39, and 40
			(Decimal)
			Selects the graphic mode number to be assigned to
			the graphics mode command specified by the
			ESC * command. See the ESC * command on page
			72.
ESC K	27 75 Ln	1B 4B Ln Hn	Normal Density Bit Image Graphics
	Hn data	data	Prints normal density bit images at 60 dpi
			horizontally and 72 dpi vertically.
ESC L	27 76 Ln	1B 4C Ln Hn	Dual Density Bit Image Graphics
	Hn data	data	Prints normal density bit images at 120 dpi
			horizontally and 72 dpi vertically.
ESC Y	27 89 Ln	1B 59 Ln Hn	Dual Density Bit Image Graphics (HighSpeed)
	Hn data	data	Prints dual density bit images at 120 dpi
			horizontally and 72 dpi vertically.
ESC Z	27 90 Ln	1B 5A Ln Hn	Quadruple Density Bit Image Graphics
	Hn data	data	Prints high density bit images at 240 dpi
			horizontally and 72 dpi vertically.

Section 4: Epson Emulation Mode Printer Commands 71