Lexmark 248X, 249X manual Character Size and Spacing

Character Size and Spacing

Name	Dec	Hex		Description
RS	30	1E		Print 10 Characters per Inch
FS	28	1C		Print 12 Charaters per Inch
ESC g	27 103	1B	67	Print 15 Charaters per Inch
GS	29	1D		Print 17.1 Charaters per Inch
ESC # 3	27 35 51	1B	23 33	Print 20 Charaters per Inch
ESC J	27 74	1B	4A	Start Superscript Printing
ESC K	27 75	1B	4B	Stop Superscript Printing
ESC L	27 76	1B	4C	Start Subscript Printing
ESC M	27 77	1B	4D	Stop Subscript Printing
ESC US	31	1F		Begin Double-Width Printing
ESC US 1	27 31 49	1B	1F 31	Begin Double-Height Printing
ESC US 0	27 31 48	1B	1F 30	End Double-Height Printing
ESC &	27 38 n1 n2	1B	26 n1 n2	Select Print Features
	n3 n4 58	n3 n4 3A		Selects print quality, character pitch and
				other print features. See the Table 1 on
				page 82 for the features applicable to
				each variable and the value of each. To
				calculate the total value of a variable,
				add the values (column 1) of each
				feature you want to use, and then add
				that sum to the variable factor (bottom
				row).
				Note: You may enter any combination of
				the variables (n1 to n4) in any order.
ESC Y	27 89	1B	59	Select Porportional Spacing
				Adjusts the space between letters to
				compensate for the varying widths of
				individual characters.
				Note: Available only with Near Letter
				Quality (NLQ) and Draft printing.
ESC Z	27 90	1B	5A	Cancel Porportional Spacing
ESC N	27 78 n	1B	4E n	Select Intercharacter Spacing
				Adds additional spacing to the right of
				each character. Valid values for n must
				be between 0 and 11.

Section 5: OKI Microline Emulation Mode Printer Commands 81