Set Top of Form and Page Length

Set Top of Form

This command sets the first line of printing on each page to the current paper position.

Format ESC 4

Decimal 27 52

Hex

1B 34

Set Page Length in Inches

This command sets the page length to a specified number of inches.

Format

ESC

C

0

inches

Decimal

27

67

0

n

Hex

1B

43

00

n

Usage Notes

The value of n is the number of inches you want to set as the page length and must be between 1 and 255.

When the command is sent, the current vertical position becomes the new top of form.

If the printer command Set Skip Perforation (ESC N) is active, or if "skip over perforation" is On in the printer setup, this printer command deacti- vates it.

Set Page Length in Lines

This command sets the page length to a specified number of lines.

Format ESC C lines

Decimal 27 67 n

Hex

1B 43 n

Usage Notes

The value of n is the number of lines you want to set as the page length and works in conjunction with the current line spacing (ESC A).

Section 3: IBM Emulation Mode Printer Commands

59

 

Page 59
Image 59
Lexmark 248X, 249X manual Set Top of Form and Page Length, Set Page Length in Inches, Set Page Length in Lines