Lexmark 323, 321 setup guide Unpack the printer memory card

Warning: Memory cards are easily damaged by static electricity. Touch something metal on the printer before you touch a memory card.

Notches Connection points

Latch

Latch

1 Complete the steps in “Removing the system board shield” on page 10.

2 Unpack the printer memory card.

Avoid touching the connection points along the edge of the card. Save the packaging.

3 Align the notches on the bottom of the card with the notches on the connector.

4 Guide the card between the latches on each end of the connector and push the card firmly into the connector.

5 Make sure each latch fits over the notch on each end of the memory card.

6 Reattach the metal shield and side cover. See page 12 for instructions.

Install memory cards

11