Step 8: Verify printer setup
Turning on the printer
1 Plug one end of the printer cord into the power cord connector at the back of the printer and the other end into a properly grounded outlet.
2 Turn on the printer.
Printing setup pages
All indicator lights cycle (each light blinks, from top to bottom, and then cycles again).
Print a Menu Settings page for a list of current printer settings. If you have a Lexmark E323n, your printer prints both a Menu Settings page and a Network Setup page, listing the IP address and other network settings.
1 Press and release Continue to print the page(s).
2 On the Menu Settings page:
•Verify that the options you installed are correctly listed under “Installed Features.”
If an option you installed is not listed on the Menu Settings page, turn the printer off, unplug the power cord, and reinstall the option.
•Verify that the amount of memory installed is correctly listed under “Printer Information.” Verify that the paper trays are configured for the sizes and types of paper you loaded.
3 On the Network Setup page, confirm that Status is “Connected.”
If Status is “Not Connected,” your LAN drop may not be active or your network cable may be malfunctioning. Consult your network support person for a solution, and then print another Network Setup page to verify that you are connected to your network.
Save the network setup page for later use.
Verify printer setup
35