Lexmark 323, 321 setup guide Using Windows 2000 with USB or parallel cable

Click Finish when the software is installed. Print a test page to verify printer setup

7

8

D:\Drivers\Win_2000\

5 Click Open, and then click OK.

6 Click Next to install the driver that is displayed. Disregard the message that the driver is not digitally signed.

Select Search for a suitable driver, and click Next. Select only Specify a location, and click Next.

Browse to the location of the printer driver on the drivers CD.

2

3

4

When the Found New Hardware Wizard screen appears:

1 Insert the drivers CD. If the CD auto launches, exit the CD. Click

Next.

Using Windows 2000 with USB or parallel cable

Note: You need administrative access to install printer drivers on your computer.

Using Windows Me with USB or parallel cable

Note: Depending on the software and printers already installed on your computer, your screens may vary from those in the instructions.

aClick Start Settings Printers.

bSelect the printer you just created.

cClick File Properties.

dClick Print Test Page. When a test page prints successfully, printer setup is complete.

You must install both a USB port driver and an enhanced custom print driver.

When the Found New Hardware Wizard screen appears.

1 Insert the drivers CD. If the CD auto launches, exit the CD. Click Next.

2 Select Automatic search for the best driver (recommended), and then click Next. The wizard searches for a USB port driver. The name of it will be similar to your printer name.

3 After the USB port driver is found, click Finish.

4 Select Automatic search for the best driver (recommended), and then click Next. The wizard now searches for a printer driver.

Install drivers for local printing

29