Lexmark 321, 323 setup guide Verifying the IP settings, ping

Verifying the IP settings

Note: On Windows computers, click Start Programs Command prompt (or Accessories Command prompt if using Windows 2000).

1 Print another Network Setup page. Look under the “TCP/IP” heading and make sure the IP address, netmask, and gateway are what you expected.

See “Printing setup pages” on page 35 if you need help.

2 Ping the printer and verify that it responds. For example, at a command prompt on a network computer, type “ping” followed by the new printer IP address (for example, 192.168.0.11):

ping xxx.xxx.x.xx

If the printer is active on the network, you receive a reply.

Configure for TCP/IP

38