Safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.

Do not place or use this product near water or wet locations.

CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

CAUTION—POTENTIAL INJURY: The lithium battery in this product is not intended to be replaced. There is a danger of explosion if a lithium battery is incorrectly replaced. Do not recharge, disassemble, or incinerate a lithium battery. Discard used lithium batteries according to the manufacturer's instructions and local regulations.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching.

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely.

CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:

•Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.

•Disconnect all cords and cables from the printer before moving it.

•If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the latch on the right side of the tray toward the front of the tray until it clicks into place.

•Use the handholds located on both sides of the printer to lift it.

•Make sure your fingers are not under the printer when you set it down.

•Before setting up the printer, make sure there is adequate clearance around it.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Use only the telecommunications (RJ‑11) cord provided with this product or a 26 AWG or larger replacement when connecting this product to the public switched telephone network.

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

CAUTION—SHOCK HAZARD: Make sure that all external connections (such as Ethernet and telephone system connections) are properly installed in their marked plug-in ports.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

836, MX810, 24T0041, MX810DFE specifications

The Lexmark MX810 series is designed for high-performance printing, scanning, copying, and faxing in demanding office environments. This series includes models such as the MX810DPE, MX810DFE, MX810DE, MX711DTHE, and MX810DME, each tailored to meet the diverse needs of businesses.

One of the standout features of the MX810 series is its exceptional print speed. With the ability to produce up to 70 pages per minute, these multifunction printers are engineered for efficiency, reducing wait times and improving productivity in fast-paced workplaces. The high-yield cartridges enable businesses to print thousands of pages before needing replacement, making them a cost-effective solution for high-volume printing.

In terms of paper handling, these models boast a substantial input capacity, accommodating up to 4,400 sheets with optional paper trays. This flexibility is essential for organizations that require a variety of media formats and sizes. The automatic duplexing feature allows for double-sided printing, further enhancing efficiency and sustainability by reducing paper consumption.

The MX810 series incorporates advanced security features to protect sensitive business information. Lexmark’s security solutions include standard data encryption, secure print release, and the ability to restrict access to certain functions based on user roles. This ensures that yalnız authorized personnel can access confidential documents or settings, fortifying the security landscape for businesses.

In addition to robust security, the MX810 series is equipped with Lexmark’s Smart Solutions, which provide customizable workflows to streamline operations. The large, color touchscreen interface makes navigation intuitive, allowing users to access features quickly and efficiently. This user-friendly design minimizes the learning curve for employees, enabling them to maximize their productivity.

Connectivity is another key characteristic of the Lexmark MX810 series. With support for Ethernet, USB, and even wireless printing options, these printers can fit seamlessly into any network environment. The capabilities for mobile printing allow users to print directly from smartphones and tablets, making it easier for today’s on-the-go professionals to connect with their devices.

Overall, the Lexmark MX810 series, including models like the MX810DPE, MX810DFE, MX810DE, MX711DTHE, and MX810DME, stands out for its fast printing speeds, extensive paper handling features, robust security, and seamless connectivity. Designed to meet the demands of busy offices, these multifunction printers are an excellent choice for businesses seeking reliability, efficiency, and advanced technology. With their combination of performance and flexibility, the MX810 series empowers organizations to enhance productivity while maintaining high standards of print quality.

Lexmark 24T0041, MX810DFE, 836 manual Safety information

Models: 836 MX810 24T0041 MX810DFE