Lexmark 24T0041, MX810DFE, 836 manual Understanding the printer menus 227

Understanding the printer menus		227
Collate	Stack the pages of a print job in sequence when printing multiple copies.
(1,1,1) (2,2,2)	Note: “(1,2,3) (1,2,3)” is the factory default setting.
(1,2,3) (1,2,3)
Sides (Duplex)	Specify whether prints are on one side or on both sides of the page.
1 sided	Note: 1 sided is the factory default setting.
2 sided
Staple	Specify whether prints are stapled.
Off	Notes:
On
	• Off is the factory default setting.
	• This menu item appears only when a staple finisher is installed.
Hole Punch	Specify whether prints have punched holes.
Off	Notes:
On
	• Off is the factory default setting.
	• This menu item appears only when a supported staple, hole punch finisher is installed.
Hole Punch Mode	Specify the number of holes to be made on the prints.
2 holes	Notes:
3 holes
	• “3 holes” is the U.S. factory default setting. “4 holes” is the international factory default
4 holes
	setting.
	• This menu item appears only when a supported staple, hole punch finisher is installed.
Duplex Binding	Define binding for duplexed pages in relation to the page orientation of the printed document.
Long Edge	Notes:
Short Edge
	• Long Edge assumes binding along the long edge of the page (left edge for portrait and top
	edge for landscape).
	• Short Edge assumes binding along the short edge of the page (top edge for portrait and
	left edge for landscape).
Paper Saver Orientation	Specify the orientation of a multiple‑page document.
Auto	Note: Auto is the factory default setting. The printer chooses between portrait and landscape.
Landscape
Portrait
Paper Saver	Specify that multiple‑page images be printed on one side of a paper.
Off	Notes:
2‑Up
	• Off is the factory default setting.
3‑Up
	• The number selected is the number of page images that will print per side.
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
Paper Saver Border	Print a border on each page image.
None	Note: None is the factory default setting.
Solid