Lexmark MX810DFE, 836, 24T0041 manual Understanding the printer menus 204

Understanding the printer menus		204
	Use	To
	Auto Center	Automatically center the content on the page.
	Off	Note: Off is the factory default setting.
	On
	Color Dropout	Specify which color to drop during scanning and to adjust the dropout setting for each
	Color Dropout	color threshold.
	None	Notes:
	Red	• None is the factory default setting for Color Dropout.
	Green
		• 128 is the factory default setting for each color threshold.
	Blue
	Default Red Threshold
	0–255
	Default Green Threshold
	0–255
	Default Blue Threshold
	0–255
	Contrast	Specify the contrast used for the copy job.
	0–5	Note: “Best for content” is the factory default setting.
	Best for content
	Mirror Image	Create a mirror image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Negative Image	Create a negative image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Shadow Detail	Adjust the amount of shadow detail visible on a copy.
	‑4 to 4	Note: 0 is the factory default setting.
	ADF Multi‑feed Sensor	Detect when the ADF picks more than one sheet of paper at once.
	On	Note: On is the factory default setting.
	Off
	Scan edge to edge	Allow edge‑to‑edge scanning of the original document.
	Off	Note: Off is the factory default setting.
	On
	Sharpness	Adjust the amount of sharpness of a copy.
	1–5	Note: 3 is the factory default setting.
	Sample Copy	Create a sample copy of the original document.
	Off	Notes:

On

•Off is the factory default setting.

•This menu item appears only when a formatted, working printer hard disk is installed.