Lexmark X862DTE, 19Z0100, 19Z0201 manual Print is too light, Troubleshooting 282, Toner is LOW

Troubleshooting 282

Print is too light

These are possible solutions. Try one or more of the following:

CHECK THE DARKNESS, BRIGHTNESS, AND CONTRAST SETTINGS

The Toner Darkness setting is too light, the Brightness setting is too light, or the Contrast setting is too low.

•Change these settings from the printer control panel Quality menu.

•For Windows users, change these settings from Print Properties.

•For Macintosh users, change these settings from the Print dialog and pop‑up menus.

THE PAPER HAS ABSORBED MOISTURE DUE TO HIGH HUMIDITY

•Load paper from a fresh package.

•Store paper in its original wrapper until you use it.

CHECK THE PAPER

Avoid textured paper with rough finishes.

CHECK THE PAPER TYPE SETTING

Make sure the paper type setting matches the paper loaded in the tray:

1From the printer control panel Paper menu, check the Paper Type setting.

2Before sending the job to print, specify the correct type setting:

•For Windows users, specify the type from Print Properties.

•For Macintosh users, specify the type from the Print dialog.

THE TONER IS LOW

When 88 Cartridge Low appears, order a new toner cartridge.

THE TONER CARTRIDGE MAY BE DEFECTIVE

Replace the toner cartridge.