Operation

To change the Maximum Auto-Retransfer Attempts parameter, do the following at the SCC:

1.From the System Configuration Screen, press the Up or Down pad to highlight Maximum Auto-

Retransfer Attempts.

2.Press the Select pad. The screen above will appear.

3.Press the Up pad to increase the value or the Down pad to decrease it.

4.Press the Select pad to set the value and to return to the System Configuration screen.

System Current Rating

System current rating is determined by the part number, which is entered at the factory and cannot be changed. Once it has been entered, the part number determines the value displayed for the System Current Rating on the SCC system configuration screen (see Figure 29).

Language Selection

English and Portuguese are supported.

System Options

Figure 35 SCC system options screen

 

 

UP: CURSOR UP

 

 

DOWN: CURSOR DOWN

 

 

SELECT: CHOOSE

 

SYSTEM OPTIONS

 

 

 

 

EXIT

 

 

LCD Contrast

 

Backlight Brightness

 

Customer Alarm Interface Board

NO

Continuous Duty Static Switch

YES

Figure 36 MMU system options screen

 

 

UP: CURSOR UP

 

 

DOWN: CURSOR DOWN

 

 

SELECT: CHOOSE

 

SYSTEM OPTIONS

 

 

 

 

EXIT

 

 

LCD Contrast

 

Backlight Brightness

 

Battery Temp. Compensated Charging

NO

Battery Test

YES

49

Page 55
Image 55
Liebert 1000kVA manual System Current Rating, Language Selection, System Options, Retransfer Attempts