High Deposition Group, High Speed Group | Lincoln Electric C2.410

“High Deposition” Group

Highest deposition rates of all electrodes. Flat, horizontal and slightly downhill (15° maximum) position only. Easy slag removal and smooth, ripple-free beads are flat or slightly convex with minimal spatter.

				Sizes & Current Ranges (Amps)
			Electrodes are manufactured in those sizes
				which current ranges are given
Product	AWS	Electrode
Product	AWS	Electrode
Name	Class	Polarity	1/8”	5/32”	3/16”	7/32”	1/4”
Jetweld® 1	E7024-1	AC	115-175 (1)	180-240	240-300	300-380	340-440
		DC±	100-160	160-215	220-280	270-340	320-400

Jetweld 3	E7024	AC	115-175 (1)	180-240	240-315	300-380	350-450
		DC±	100-160	160-215	215-285	270-340	315-405

Jetweld 2	E6027	AC	---	190-240	250-300	300-380	350-450
		DC±	---	175-215	230-270	270-340	315-405

(1)Range for 3/32” is 65-120 amps AC or 60-110 amps DC±.

“High Speed” Group

Operates in all positions, but most widely use downhill, horizontal or in the flat posi- tion. Ideal for irregular or short welds that change direction or position. Medium deposit rates and medium penetration. Appearance ranges from smooth and ripple- free to even with distinct ripples.

				Sizes & Current Ranges (Amps)
			Electrodes are manufactured in those sizes for
				which current ranges are given
Product	AWS	Electrode
Product	AWS	Electrode
Name	Class	Polarity	3/32”	1/8”	5/32”	3/16”	7/32”		1/4”
Fleetweld 7	E6012	DC-	---	80-135	110-180	155-250	225-295		245-325
		AC	---	90-150	120-200	170-275	250-325		275-360

Fleetweld 37	E6013	AC	75-105 (1)	110-150	160-200	205-260	---		---
		DC±	70-95	100-135	145-180	190-235	---		---
Fleetweld 47	E7014	AC	80-100	110-160	150-225	200-280	260-340		280-425
		DC-	75-95	110-145	135-200	185-235	235-305		260-380

(1)Range for 5/64” Fleetweld 37 is 50 - 80 amps AC or 45-75 amps DC. 1/16” Fleetweld 37 is 20-45 amps AC or DC.

-37-

Image 37

Lincoln Electric C2.410 manual High Deposition Group, High Speed Group

Contents

Stick Electrode Welding Guide Page Table of Contents Out-Of-Position Welding Vertical and Overhead Welding Procedures Vertical Up Techniques for Fillet and Groove Welds Vertical Down Welds Vertical Up Groove Welds 160 Polarity Vertical Up Fillet WeldsWeld Jetweld LH-3800 E7028H8 High-Deposition Welding Wrong End view Side view Corner Welds Groove Welds First Pass Groove WeldsJetweld 2 E6027 Amps. AC at 14/Min Over E6011 Root Passes Deep Groove Welds Joint a Pass E6011T Plate Size T 14 ga 12 ga 10 ga No. of Passes Leg Size L Flat Fillet WeldsFt. of Weld/Hr Lbs. of Elec./Ft. 049 082 117 162 Weld Horizontal Fillet Welds Welding Inclined Plate Polarity Arc Speed In./Min.3 Lbs. of Elec./Ft. Downhill Angle deg180 Alternate High Speed Welding Sheet MetalPage Edge Welds Lap Welds Fillet Welds Current Amps 110 155 Polarity Diameter PositionCurrent Amps 120 170 Polarity 018 028 Roof Deck Thickness 22 ga 20 ga 18 ga 16 ga Burnthrough Spot Welds Roof Decking to Beam Roof Beam Flange E7018-1 Low Hydrogen Welding Multipass Page Diameter Current Amps 155 Polarity Overhead Groove Welds No. of Pass Leg Size L Overhead Fillet Welds Also see Out-of Position Procedures,Arc Speed In./Min Ft. of Weld/Hr Lbs. of Elec./Ft. No. of Passes Leg Size L Back gouge first bead as needed Plate Size T No. of Passes Horizontal Groove WeldsDiameter Current Amps 230 200 Polarity Arc Speed In./Min Ft. of Weld/Hr Lbs. of Elec./Ft. of Weld 230 200 Polarity Use steel backing as on With E7028 Electrode 275 350 With E7018 Electrode132 195 272 409 727 157 236 320 260 335 203 335 Ft. of Weld/Hr.2 Lbs. of Elec./Ft.785 Minimum Preheat and Interpass Temperature1 Out-of-Position Group Stick Electrode Typical Operating Procedures High Speed Group High Deposition Group Low Hydrogen, Low Alloy Steel Group Low Hydrogen Group Fleetweld 5P Shield-Arc Fleetweld 5P+ Fleetweld JetweldFleetweld Fleetweld 35LS Jetweld Shield-Arc 70+ Shield-Arc HYP+ Electric Shock can kill Fumes and Gases can be dangerous For Electrically powered Electric and Magnetic Fields Stick C2.410 12/04