Lincoln Electric IM10018-A manual Lincoln Wire

IDEALARC® DC-600 VRD

CONNECTION OF DH-10 OR LN-10 TO THE DC-600 VRD POWER SOURCE WITH 14 PIN AMPHENOL

		Do not operate with covers removed.
LINCOLN	WIRE	Disconnect power source before
		servicing.
POWER SOURCE	FEEDER	Do not touch electrically live parts.
		Only qualified persons should install, use or

						service this machine.
		N.E.
	-				N.A. WELDING CABLE MUST BE SIZED FOR CURRENT
		+				AND DUTY CYCLE OF APPLICATION.
			9 PIN		N.B. DIAGRAM SHOWS ELECTRODE POSITIVE. TO
		14 PIN				CHANGE POLARITY, TURN POWER "OFF",
						REVERSE ELECTRODE AND WORK CABLES AT
		AMPHENOL	AMPHENOL			POWER SOURCE.
					N.C. PINS NOT LISTED ARE NOT CONNECTED
						ON CABLE.
					N.D. IF LEAD #21 IS TO BE CONNECTED TO THE
		ELECTRODE CABLE	WIRE FEEDER		TERMINAL STRIP, CONNECT TO THE #21
						TERMINAL THAT MATCHES WORK POLARITY.
		TO WORK	INPUT CABLE		THIS CONNECTION MUST BE CHANGED WHENEVER
			ASSEMBLY		THE ELECTRODE POLARITY IS CHANGED.
					N.E. ILLUSTRATION DOES NOT NECESSARILY REPRESENT
FOR PROPER SETTINGS OF SWITCHES ON POWER SOURCE,						ACTUAL POSITION OF APPROPRIATE OUTPUT STUDS.
SEE POWER SOURCE OPERATING MANUAL.						REFER TO POWER SOURCE OPERATING MANUAL FOR
						MORE INFORMATION.
FUNCTIONS ARE LISTED FOR REFERENCE			K=42			J	K=42
ONLY AND EACH MAY OR MAY NOT BE			A		J			A
PRESENT IN YOUR EQUIPMENT.			B=GND		I=41	I=41		B=GND
(SEE APPROPRIATE WIRING DIAGRAM)
PIN	LEAD	FUNCTION	C=2		H=21	H=21		C=2
B	GND	CHASSIS CONNECTION
C	2	TRIGGER CIRCUIT	L		N	N		L
D	4	TRIGGER CIRCUIT	D=4		G=75			D=4
E	77	OUTPUT CONTROL				G=75
F	76	OUTPUT CONTROL	E=77	M	F=76	F=76	M	E=77
G	75	OUTPUT CONTROL	14-SOCKET BOX RECEPTACLE,		FRONT VIEW	14-SOCKET BOX RECEPTACLE,		REAR VIEW
	21	WORK
H			AND 14-PIN CABLE PLUG,	REAR VIEW		AND 14-PIN CABLE PLUG, FRONT VIEW
I	41	42V AC

K	42	42V AC	10-30-98F
			S22980

F-10

DIAGRAMS

F-10