Lincoln Electric R3R-300 Options/Accessories, Factory Installed Options, TIG Welding Options

C-2 C-2

ACCESSORIES

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

OPTIONS/ACCESSORIES

FACTORY INSTALLED OPTIONS

POLARITY SWITCH

Permits changing polarity at the machine output ter- minals.

METERS

Ammeter and Voltmeter.

POCKET AMPTROL

Provides a wireless remote current control for R3R welders. See the Operation section for details.

FIELD INSTALLED OPTIONS

The following options/accessories are available for your Idealarc R3R from your local Lincoln Distributor.

Remote Current Control (K857) - Portable current control provides the same dial range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote control Amphenol.

Accessory Kits (For R3R-300 and R3R-400) - Consists of electrode and work cables, headshield, electrode holder and work clamp.

R3R-300 - K703

R3R-400 - K704

Undercarriage (K817P) - A mounting frame with wheels for hand moving.

Undercarriage (K841) - Platform undercarriage with mountings for two gas cylinders at rear of welder.

TIG WELDING OPTIONS

TIG Module (K930-2)- Portable, high frequency unit with gas valve for TIG welding. Rated at 300 amps/60% duty cycle. (Request publication E3.205)

Water Valve Kit (K844-1) - For use with a water- cooled TIG torch. Controlled by the preflow and after- flow timers. Installs inside the TIG module.

Amptrol™ - Provides 25 ft. (7.6m) of remote current control for TIG welding. (6 pin MS-type plug connec- tion).

Foot Amptrol - K870

Hand Amptrol - K963-1

Hand Amptrol - K963-2

Contactor Kit (K938-1)- For use with the TIG Module.

Docking Kit (K939-1)- Secures TIG Module on top of R3R machines, or any flat surface at least 10 in x 15 in (254mm x 381mm). Mounts using strong grip adhe- sive pad or fasteners. Includes latch and provisions for a user-supplied padlock.

Control Cable (K936-3)- Connects the TIG Module to the R3R machine (9 to 6 plus 115V plug).

Control Cable Extensions - Allows the TIG Module to be operated at distances up to 200 ft. (61m) from the power source. Two lengths are available: 22.5ft.(6.9m) or 45ft. (13.7m).

22.5ft. - K937-22.5 45 ft. - K937-45

Return to Section TOC

Return to Master TOC

IDEALARC R3R