Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
OPERATION
MACHINE INTERFACE
The
ARC START:
The Arc Start circuit allows for triggering of the power source to commence cutting. This circuit can be accessed through pins K and M of the 14 pin MS con- nector. The circuit has a 17 VDC nominal open circuit voltage and requires a dry contact closure to activate.
ARC INITIATED:
The Arc Initiated circuit provides information as to when a cutting arc has transferred to the work piece. This circuit can be accessed through pins I and J of the 14 pin MS connector. The circuit provides a dry contact closure when the arc has transferred. Input to this cir- cuit should be limited to 0.3 A for either 120VAC or 30VDC.
ARC VOLTAGE:
The Arc Voltage circuit can be used for activating a torch height control. This circuit can be accessed through pins D and G of the 14 pin MS connector. The circuit provides full electrode to work arc voltage (no voltage divider, 335VDC maximum).
Arc Start | K=2A | J=347 | Arc Initiated |
|
| ||
| M=4A | I=348 |
|
|
|
| |
| L | H |
|
|
|
| |
| C | N |
|
|
|
|
D=344 G=343
EF
Arc Voltage
14 - PIN BOX RECEPTACLE, FRONT VIEW
Users wishing to utilize the Machine Interface can order a K867 Universal Adapter (please adhere to the pin locations stated above) or manufacture a 14 pin MS connector cable assembly.