Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
TROUBLESHOOTING & REPAIR
PRIMARY POWER BOARD AND FILTER CAPACITOR
REMOVAL AND REPLACEMENT (continued)
FIGURE F.24 – POWER BOARD HEATSINK AND CAPACITOR REMOVAL
Heatsink Mounting
Screws (4)
Mounting
Screws (2)
Socket Head
Screws (8)
7. Using the Phillips Head screw driver, remove | 9. Carefully remove the primary power board |
the two mounting screws from the top right of | from the heat sink. |
the primary power board. See Figure F.24. |
|
Return to Section TOC
Return to Master TOC
8.Using the 3/16” allen type wrench, remove the eight socket head screws and lock wash- ers mounting the primary power board to the heat sink.
PRO-CUT 80
CAUTION
Be sure to follow the recommended
