Delay Models

Sweep Echo & Sweep Echo DryThru

For this model we started with the tone of our EP-1 delay emulation, then added a sweep- ing filter effect to the delay repeats. By design, our original Sweep Echo model did not have a flat EQ response in the dry signal path, so the character of the original was retained. In the M13 we’ve added a DryThru version, with flat EQ when Mix is at 0%.

A

Sweep Echo

DELAY

469 MS

SWP SPD

SWP DEP

 

A

Sweep Echo DryThru

FDBK

DELAY

 

469 MS

FDBK

MIX

SWP SPD

SWP DEP

MIX

Knob 1: Delay Time. Displayed in milliseconds or note value.

Knob 2: Delay Feedback.

Knob 3: Speed of the sweep effect.

5•5

 

Knob 4: Depth of the sweep effect.

Knob 5: Mix between dry guitar and wet. At 100% you will hear the delay only.

Lo Res Delay

Low bit resolution can create a unique sort of grunge and noise that is sometimes just the sound you’re looking for, and that’s what the Lo Res Delay model provides.

A

Lo Res Delay

 

 

 

 

 

 

 

 

DELAY

TONE

403MS

RES

FDBK

MIX

Knob 1: Delay Time. Displayed in milliseconds or note value.

Knob 2: Delay Feedback.

Knob 3: Tone of the delays only.

Knob 4: Resolution, adjustable from 6 to 24 bits.

Knob 5: Mix.

*All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Line 6’s sound model development.

Page 29
Image 29
Line 6 M13 manual Sweep Echo & Sweep Echo DryThru, Lo Res Delay