Appendix A : Reference

Appendix A : Reference

MIDI Control

The M13 will send and receive MIDI CC and Program Change messages on any MIDI Channel from 1 thru 16 or Omni, selectable from the M13 Setup mode, LCD 4. MIDI implementation includes MIDI CCs for Looper Control, FX Unit On and Bypass messages, Tap Tempo, Expression Pedal CCs and Program Change messages for Scene select. It is therefor possible to control the M13 from a MIDI controller or a computer sequencer.

The most common application would probably be to use a separate MIDI controller to control the M13 Looper, so that all 12 Scene select switches on the M13 would be available for individual FX control.

Individual Model selection and assignment for each FX Unit from the 5 different FX groups is not implemented, but individual FX loaded into the A, B and C memory locations of all 4 FX Units can be engaged or bypassed via MIDI CCs. The MIDI Reference Tables in this chapter represent the currenly implemented MIDI spec. A more expanded MIDI implementation may be forthcoming in future M13 firmware updates.

Looper & Expression Pedals

M13 Footswitch

MIDI CC#

Looper Function

 

Record/Overdub

50

0 to 63

= Overdub

64 to 127 = Record

Play/Stop

28

0 to 63

= Stop

64 to 127 = Play

Half Speed

36

Toggles between Half Speed & Normal Speed

Reverse

85

Toggles Reverse On or Off

Undo

82

Activates Undo

 

Play Once

80

Activates Play Once function

Pre/Post

84

0 to 63

= Pre

64 to 127 = Post

Looper Levels

---

Controlled via EXP pedal only -- not MIDI CC

A•1

Expression Pedal 1

1

0 to 127

Expression Pedal 2

2

0 to 127

Tap Tempo

64

2 taps determine tempo

Page 67
Image 67
Line 6 M13 manual Appendix a Reference, Midi Control, Looper & Expression Pedals