Filter Models

8•6

Throbber
Inspired by the versatile Electrix® Filter Factory. Like the LFO section of the Filter Fac-
tory, the Throbber alters the brightness of your tone with an emphasis on a specific fre-
quency that you can select. Throbber is perfect for those Electronica sounds.
Knob 1: Frequency: Selects a specific frequency range for the filter.
Knob 2: Q. Controls the width of the filter.
Knob 3: Speed. Sets the rate of the low frequency oscillator.
Knob 4: Mode. Selects between four different wave shapes.
Knob 5: Mix.
RAMP DW
TRIANGLE
SQUARE

Throbber

MIX
FILTER
4.80HZ
C
FREQ
RAMP UP
Q

Spin Cycle

C
MIX
FILTER
1.21HZ
FREQ
VOLSENS
Q
Knob 1: Frequency. Controls the range of the filter emphasis in the wah tone.
Knob 2: Q. Controls the width of the filter.
Knob 3: Speed. Sets the speed at which the wah effects sweep.
Knob 4: Volume Sensitivity. Sets the way volume will affect the speed of the effect.
Knob 5: Mix.
Inspired by Craig Anderton’s Wah/Anti-Wah, this effect takes full advantage of the M13’s
stereo capabilities. It’s essentially two wah pedals panned L & R that wah in the opposite
direction from each other. One goes up while the other goes down. Additionally, the wahs
are sweeping from min to max automatically, and they react to playing volume.
Spin Cycle
* All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were
studied during Line 6’s sound model development. Electrix® is a registered trademark of Electrix Pro, Inc.