Appendix B : Tips

B•3

Flash Memory Update Instructions
Here are some instructions on how to update your M13’s Flash Memory. Please note that
Line 6 does not endorse Cubase, MIDI Ox or Sysex Librarian. We refer to these apps as
examples only, since users report that they often use them to perform firmware updates.
Needed:
A MIDI interface that connects to your computer via USB (download the current
Driver for it if you don’t have it installed).
2 MIDI cables (or a MIDI interface that comes with MIDI cables attached).
A MIDI sequencer app such as Cubase, or a sysex app such as MIDI Ox (Windows)
or Sysex Librarian (Mac).
Mac users: go to Page B•4 and follow the steps under Procedure.
Additional Info For Windows/MIDI Ox Users:
Make sure your MIDI interface Driver is installed and working.
Run the MIDI Ox application.
Go to Option, then MIDI Devices, select USB Audio Device for both MIDI Inputs
and MIDI Outputs; uncheck Automatically Attach Inputs To Outputs During
Selection; click OK to accept it.
Go to View, then Port Routing, delete the connection between Input Ports and
Output ports if they are connected; make sure only MIDI Ox Event Port connects
to Output Ports.
Go to View, then Sysex; In Sysex View and Scratchpad, go to Sysex, then Configure,
make sure you check Delay after F7 and set the Delay (Milliseconds Between Buffers)
to 101; click OK to accept.
Now go to Page B•4 and follow the steps under Procedure.
(NOTE: if the update fails and you’re using a USB hub, please try it without the hub).