8.CUSTOMIZING THE CONSOLE
◆The Console can be customized for the specific installation.
◆A label sheet with sensor location names is provided with the Console.
◆Labeling the sensors allows quick and easy identification of where any alarms have occurred, where a sensor with a low battery is, where a sensor with radio trouble is, etc.
LABELING THE SENSORS
Use a paper clip to remove the clear display window.
Bend down the tabs on the sensor number card and fit it onto the Console.
Open one protected door/window to light its sensor status light on the Console.
Choose a label that describes the sensor location, or write the location on a blank label, and stick it in the area to the right of the sensor light.
Close the protected opening that you just labeled.
Repeat for each protected opening.
Stick the WIRELESS KEYPAD label in the
sensor number location for the wireless keypad (if used).
Replace the clear display window when finished.
USE SENSOR
LABELS PROVIDED
WRITE IN SPECIAL
LOCATIONS ON
BLANK LABELS
BEND TABS DOWN
AND INSERT IN
SLOTS
OPEN DOOR
OR WINDOW
TO LIGHT
SENSOR STATUS
INDICATOR
ON CONSOLE
APPLY SENSOR IDENTIFICATION
LABELS TO THE APPROPRIATE
SENSOR LOCATIONS
16