Linear DVS-1200 manual TEST MODE

TEST MODE

◆Even though this is a self-monitoring supervised system, the National Burglar and Fire Alarm Association recommends that all security systems should be tested manually on a regular basis.

◆The Console must be in Off Mode before going to Test Mode.

Switch the Console into Test Mode by entering

TEST MODE

START IN OFF

a user code and pressing [TEST].

❇When the system is switched to the Test Mode, the Console will sound a “Gong” and four “Beeps”.

Holding down the [TEST] button in Test Mode will light all of the Console’s indicators.

❇The sensor status lights will flash for each sensor programmed into the Console.

Go to each sensor and press its test button or open and close the protected opening.

To test the wireless keypad, press the [(A)] key.

❇ The Console will make a “bing” sound as each

sensor is tested.

❇ As each sensor is tested, the sensor status

TEST

(OPTIONAL)

YOUR

USER

CODE

1 GONG

& 4 BEEPS

light for the sensor will stop flashing and

return to showing the current status of the

sensor.

Continue testing until there are no flashing status lights.

✍NOTE: If the Console is left unattended in Test Mode, it will automatically switch back to Off Mode after 3 minutes.

◆When directly connecting (without a telephone line) to the DVS-1200 with the RA-2400 remote access software (Version 1.3 or later), press the [EMERGENCY] key while in Test Mode to cause the Console to connect to the modem.

DONE

		SENSOR FUNCTION IN EACH CONSOLE MODE
SENSOR TYPE	OFF MODE		CHIME MODE	HOME MODE	AWAY MODE
AUTOMATION			ACTIVATES AND DEACTIVATES THE AUTOMATION OUTPUT
EMERGENCY			ARMED 24-HOURS - TRIGGERS EMERGENCY ALARM
PANIC			ARMED 24-HOURS - TRIGGERS SILENT PANIC ALARM
FIRE			ARMED 24-HOURS - TRIGGERS FIRE ALARM
PERIMETER	DEACTIVATED		CHIME	INSTANT BURGLARY ALARM
EXIT/ENTRY	DEACTIVATED		CHIME	DELAYED BURGLARY ALARM
					FOLLOWER
INTERIOR	DEACTIVATED		DEACTIVATED	DEACTIVATED	(INSTANT BURGLARY ALARM
					UNLESS ACTIVATED DURING
					ENTRY DELAY)
CHIME			CHIME
2-BUTTON ARM/DISARM (LEFT)	LEFT BUTTON SWITCHES CONSOLE TO AWAY OR HOME MODE
	(PROGRAMMING FUNCTION 50)			LEFT BUTTON SWITCHES TO OFF OR CHIME MODE
2-BUTTON AUTOMATION (RIGHT)
	IF ALARM MEMORY IS ACTIVE, SWITCHES CONSOLE TO OFF OR			(PROGRAMMING FUNCTION 51)
EMERGENCY (BOTH)
	CHIME MODE (PROGRAMMING FUNCTION 51)
	LEFT BUTTON SWITCHES CONSOLE TO AWAY OR HOME MODE
2-BUTTON ARM (LEFT)	(PROGRAMMING FUNCTION 50)			RIGHT BUTTON SWITCHES TO OFF OR CHIME MODE
2-BUTTON DISARM (RIGHT)	IF ALARM MEMORY IS ACTIVE, SWITCHES CONSOLE TO OFF OR			(PROGRAMMING FUNCTION 51)
	CHIME MODE (PROGRAMMING FUNCTION 51)
ENVIRONMENTAL			ARMED 24-HOURS - TRIGGERS ANNUNCIATION ONLY

Console Zone Table

20