MAKING A SENSOR A 24-HOUR DOOR CHIME

◆ Sensors can be programmed to cause the

Console to chime any time they’re activated.

◆ Chime-only sensors will not be able to trigger

START IN TEST

the alarm in any Console mode.

◆ The sensor must have already been learned

by the Console (see “Adding sensors to the

System” for details).

Start with the Console in Test Mode. Enter the master user code then press the [TEST] button.

❇A “gong” and five “beeps” will sound.

❇The sensor status indicators will light for each sensor programmed into the Console.

Enter the sensor number from 01-12 (you must enter two digits, example: 5 = 05).

❇The sensor indicator light will flash for the sensor number selected.

TEST

MASTER

USER

CODE

1 GONG &

5 BEEPS

SENSOR NUMBER FOR CHIME

Press [HOME], 8, then [AWAY]. A “bing” tone will sound.

Enter another sensor number or exit Setup Mode by holding the [OFF] button for three seconds.

MAKING A SENSOR INTERIOR

◆Motion detectors are automatically programmed as interior sensors. Any other sensor can also be programmed as an interior sensor.

◆Interior sensors can only trigger an alarm when the Console is in Away Mode.

◆The sensor must have already been learned by the Console (see “Adding sensors to the System” for details).

Start with the Console in Test Mode.

HOME

8 FOR 8 TUV CHIME ZONE

AWAY

1 BING

 

DONE

START IN TEST

Enter the master user code then press the [TEST] button.

❇A “gong” and five “beeps” will sound.

❇The sensor status indicators will light for each sensor programmed into the Console.

Enter the sensor number from 01-12 (you must enter two digits, example: 5 = 05).

❇The sensor indicator light will flash for the sensor number selected.

Press [HOME], 7, then [AWAY]. A “bing” tone will sound.

Enter another sensor number or exit Setup Mode by holding the [OFF] button for three seconds.

TEST

MASTER USER CODE

1 GONG &

5 BEEPS

SENSOR NUMBER FOR INTERIOR

HOME

7 FOR

7 PRS INTERIOR

ZONE

AWAY

1 BING

 

DONE

23