3. TYPICAL SYSTEM SENSORS

DOOR/WINDOW SENSOR

◆Sensor mounts on door or window with adjacent magnet.

◆Opening door or window moves magnet away, triggering sensor.

◆Pressing the case causes sensor to send a test signal.

◆Jumper inside for INSTANT or DELAYED alarm setting.

◆Press the case for testing, the red transmit light shows that battery is in good condition.

◆Internal lithium batteries are monitored by the Console.

◆Sends hourly status reports to the Console.

◆Up to 3 years battery life (depends on frequency of activation). (UL tested for 1 year minimum.)

◆Sensor contains internal terminals for connection to glass break detector and external switches.

WIRELESS KEYPAD

◆For controlling the system without having to go to the Console.

◆Emergency and fire alarm can be triggered from wireless keypad at any time.

✍UL NOTE: For personal emergency use only. Not for use as a UL Listed Medical Alert System.

◆Green operation light.

◆Internal 9-volt battery is monitored by the Console.

◆Keypad’s beeper will buzz during transmissions when the battery is low.

◆Up to 3 years battery life (depends on frequency of activation). (UL tested for 1 year minimum.)

◆Sends hourly status reports to the Console.

◆Press the [(A)] key to activate the automation output.

◆Pressing [∗] clears the keypad.

◆Holding [∗] for two seconds sounds the mode beeps from the Console.

✔Off Mode: 1 “Gong”

✔Chime Mode: 1 “Gong” & 1 “Beep”.

✔Home Mode: 1 “Gong” & 2 “Beeps”.

✔Away Mode: 1 “Gong” & 3 “Beeps”.

✔Test Mode: 1 “Bing” & 4 “Beeps”.

5