2. SECURITY SYSTEM FLOOR PLAN
EXAMPLE SYSTEM
◆The example shows a typical
◆Any or all of the accessories shown can be used.
◆A total of 12 sensors (including keypads) can be used with each Console.
DESIGN THE INSTALLATION
Create a floor plan of the installation.
Consider the security needs of the premises.
Determine which doors and windows are vulnerable to intrusion.
Figure which interior areas an intruder might go to if unlawful entrance is gained.
Indicate locations for door/window sensors,
interior motion detectors, keypads, glass break detectors and external siren speakers. Decide on a centralized location for the security Console.
ES
MD | GB | S | MS | |
|
| WK |
| |
| LIVING | ENTRY |
| |
|
|
| ||
S |
|
|
| |
|
|
| KITCHEN | |
S | BED | DINING | CON | |
| ||||
|
|
| MS | |
MS |
|
| ||
| SD | BED | S | |
BATH | ||||
| ||||
|
|
NOTE: IN NEW CONSTRUCTION, NFPA 71 REQUIRES A SMOKE DETECTOR LOCATED INSIDE EACH BEDROOM AS WELL AS A SMOKE DETECTOR ON EACH LEVEL.
CON - CONSOLE
S - DOOR/WINDOW SENSOR WK - WIRELESS KEYPAD MD - MOTION DETECTOR ES - EXTERNAL SIREN
SD - SMOKE DETECTOR GB - GLASS BREAK SENSOR
MS - EXTERNAL MAGNETIC SWITCH
Example Residential Security System Floor Plan
4