9. CONSOLE OPERATING MODES

OFF MODE

◆Use this mode to disarm the burglary portion of the system.

◆Switching to Off Mode stops any alarms in progress.

◆The 24-hour functions are still active in Off Mode and can be triggered by pressing the [FIRE] or [EMERGENCY] button.

Switch to Off Mode by entering the user code, and pressing [OFF].

❇When the system is disarmed to Off Mode, the Console will sound one “Gong”.

❇If an alarm has occurred, multiple beeps will sound after disarming and the sensor light for the sensor(s) that caused the alarm will flash.

✍NOTE: In Off Mode, protected doors and windows cannot trigger the burglary alarm.

OFF MODE

START HERE

(OPTIONAL)

YOUR

USER

CODE

OFF 1 GONG

DONE

CHIME MODE

CHIME MODE

START HERE

◆Chime Mode is for monitoring entries and exits without causing alarms.

◆Use Chime Mode as an “automatic door chime” when at home.

❇Opening any protected door or window causes the Console to sound a “ding-dong”.

Select the Chime Mode by entering a user code, then press [CHIME].

The user can enter Chime Mode from Off Mode by holding down the [CHIME] key for two seconds.

CHIME

(OPTIONAL)

YOUR

USER

CODE

1 GONG & 1 BEEP

❇When the system is switched to the Chime Mode, the Console will sound a “Gong” and one “Beep”.

◆Going to Chime Mode disarms the system and stops any alarms in progress.

✍NOTE: In Chime Mode, protected doors and windows cannot trigger the burglary alarm.

DONE

START IN OFF

HOLD

CHIME DOWN

1 GONG & 1 BEEP

DONE

17