User Guide
EtherFast 10/100 PrintServers
Instant EtherFast Series
COPYRIGHT & TRADEMARKS
LIMITED WARRANTY
Linksys P.O. Box 18558, Irvine, CA FCC STATEMENT
Reorient or relocate the receiving antenna
Instant EtherFast Series
Table of Contents
EtherFast 10/100 PrintServers
Features
Chapter 1 Introduction
The EtherFast 10/100 PrintServers
Package Contents for the 3-Port PrintServer
Chapter 2 Getting to Know the EtherFast 3-Port PrintServer
Package Contents for the 1-Port PrintServer
Power
Power Port
Chapter 3 Getting to Know the EtherFast 1-Port PrintServer
Reset Button
Reset Button
Power Port
Chapter 4 Hardware Installation
Reset Button
Reset Button
Installing the Windows Drivers
Chapter 5 Windows Driver Setup
3. Click Next to accept the default Destination Directory, shown in Figure 5-3 recommended. If you choose to utilize another directory, click the Browse button, and choose the appropriate directory. Then, click the Next button
7. The Printer Port Setup screen will display the PrintServer and all of the printers with which it communicates. Here, you have the option of installing the printer by highlighting its description and clicking the Next button. You can also close this screen by clicking the Close button
Installing the Bi-Admin Management Utility
Chapter 6 Bi-Admin PrintServer Management
Starting the Bi-Admin Management Utility
Using Bi-Admin
Bi-Admin Help Files
Changing the Device Name
Setting the PrintServer’s IP Address
Resetting the PrintServer
Attaching Bi-Admin to a Remote PrintServer
Restoring Factory Default
Enabling and Disabling Protocols
Accessing the Web-based Utility
Chapter 7 Configuring the PrintServer Using the Web- based Utility
The Server Page
The Printer Page
The Status Page
The TCP/IP Page
The AppleTalk Page
Chapter 8 Advanced Properties
The NetBEUI Page
The Logical Printers Page
Remote Printer Mode
The NetWare Page
Print Server Mode
Master File Server Bindery Mode only Name of the PrintServers master
General
The SNMP Page
Management Stations
Trap Receivers
Windows IPP Client Setup
Chapter 9 Internet Printing Protocol IPP
Installing using IPP CLIENT.EXE
IPP Client Configuration for Windows 95, 98, Millennium, and NT
Changing the IPP Port Settings
Installation is now complete
1. Open the Printers folder Start = Settings = Printers
The IPP printer is now ready for use Using IPP Printers
IPP Client Setup for Windows 2000 and XP
Pure IP NetWare 5.x Setup
Chapter 10 NetWare Services Setup
Overview
Print Server Mode and Remote Printer Mode in NetWare
3. Select NDPS Printer
LOAD NDPSM PMGR.TeSupp
IPX Printing in NetWare 5.x, 4.x and
main Printer Manager window
Hardware Issues
Appendix A Troubleshooting
General Printing Issues
Print Diagnostic Report
NetWare Printing Issues
NetWare 2.x and
NetWare 4.x and 5.x Bindery & NDS modes
Connecting to Server
Password Mismatch
Connected
Print Server Not Defined
d. Run PCONSOLE
Windows Printing Issues
Canon LBP-430W Epson ActionLaser 1300/W, Epson EPL-5500/W
Appendix B DHCP Support for the PrintServer
Appendix C Setting Up The T C P/IP and IPX Protocols
Setting Up TCP/IP in Windows
IPX Setup for Windows 95, 98, and Millennium
TCP/IP Setup for Windows 95, 98, and Millennium
TCP/IP Setup for Windows NT
IPX Setup for Windows NT
IPX Setup for Windows
TCP/IP Setup for Windows
IPX Setup for Windows XP
TCP/IP Setup for Windows XP
LPR Port Setup in Windows NT
Appendix D Setting Up the LPR Port in Windows NT 4.0 and XP
Standard TCP/IP Print Port Setup in Windows 2000 and XP
L1 L2 L3
Connecting to Other Switches and Hubs
Appendix E Tips on Using the EtherFast 10/100 PrintServer
About Bi-directional Printing
About the PrintServer’s Software
Appendix F Specifications for the 3-Port PrintServer
Appendix H Warranty Information
Appendix G Specifications for the 1-Port PrintServer
One DMA-Equipped Bi-directional Printer Ports
RMA Issues
Appendix I Contact Information
Sales Information
Technical Support
Copyright 2002 Linksys, All Rights Reserved