![](/images/new-backgrounds/1309955/309955227x1.webp)
Chapter 5 Linksys IP Phone Field Reference
SIP Tab
SIP Tab
This section describes the fields for the following headings on the SIP tab:
•SIP Parameters, page
•SIP Timer Values (sec), page
•Response Status Code Handling, page
•RTP Parameters, page
•SDP Payload Types, page
•NAT Support Parameters, page
•Linksys Key System Parameters, page
SIP Parameters
Note None of the following parameters apply to the SPA901.
| Field | Description | |||
|
|
| |||
| Max Forward | SIP Max Forward value, which can range from 1 to 255. | |||
|
| Defaults to 70. | |||
|
|
| |||
| Max Redirection | Number of times an invite can be redirected to avoid an infinite loop. | |||
|
| Defaults to 5. | |||
|
|
| |||
| Max Auth | Maximum number of times (from 0 to 255) a request may be challenged. | |||
|
| Defaults to 2. | |||
|
|
| |||
| SIP User Agent Name | Used in outbound REGISTER requests. | |||
|
| Defaults to $VERSION. If empty, the header is not included. Macro expansion of $A to | |||
|
| $D corresponding to GPP_A to GPP_D allowed. | |||
|
|
| |||
| SIP Server Name | Server header used in responses to inbound responses. | |||
|
| Defaults to $VERSION. | |||
|
|
| |||
| SIP Reg User Agent Name | ||||
|
| Agent Name> is also used for the REGISTER request. | |||
|
| Defaults to blank. | |||
|
|
| |||
| SIP Accept Language | ||||
|
| Language field. | |||
|
| There is no default (this indicates Linksys IP phone does not include this header). If | |||
|
| empty, the header is not included. | |||
|
|
| |||
| DTMF Relay MIME Type | MIME Type used in a SIP INFO message to signal a DTMF event. This field must match | |||
|
| that of the Service Provider. | |||
|
| Defaults to | |||
|
|
|
|
| |
|
| Linksys IP Phone Administrator Guide |
|
| |
|
|
| |||
|
|
|
|
|
|
| Firmware Version 5.1 |
|
|
| |
|
|
|
|