![](/images/new-backgrounds/1309955/309955257x1.webp)
Chapter 5 Linksys IP Phone Field Reference
Regional Tab
Field | Description |
|
|
Secure One Call Act Code | Makes the next outbound call secure. (It is redundant if all outbound calls are secure by |
| default.) |
| Defaults to *18. |
|
|
Secure One Call Deact Code | Makes the next outbound call not secure. (It is redundant if all outbound calls are not |
| secure by default.) |
| Defaults to *19. |
|
|
Paging Code | The star code used for paging the other clients in the group. |
| Defaults to *96. |
|
|
Call Park Code | The star code used for parking the current call. |
| Defaults to *38. |
|
|
Call Pickup Code | The star code used for picking up a ringing call. |
| Defaults to *36. |
|
|
Call UnPark Code | The star code used for picking up a call from the call park. |
| Defaults to *39. |
|
|
Group Call Pickup Code | The star code used for picking up a group call. |
| Defaults to *37. |
|
|
Media Loopback Code | The star code used for media loopback. |
| Defaults to *03. |
|
|
Referral Services Codes | These codes tell the Linksys IP phone what to do when the user places the current call on |
| hold and is listening to the second dial tone. |
| One or more *code can be configured into this parameter, such as *98, or *97*98*123, |
| etc. Max total length is 79 chars. This parameter applies when the user places the current |
| call on hold (by Hook Flash) and is listening to second dial tone. Each *code (and the |
| following valid target number according to current dial plan) entered on the second |
| |
| is prepended by the service *code. |
| For example, after the user dials *98, the Linksys IP phone plays a special dial tone called |
| the Prompt Tone while waiting for the user the enter a target number (which is checked |
| according to dial plan as in normal dialing). When a complete number is entered, the |
| Linksys IP phone sends a blind REFER to the holding party with the |
| equals to *98<target_number>. This feature allows the Linksys IP phone to hand off a call |
| to an application server to perform further processing, such as call park. |
| The *codes should not conflict with any of the other vertical service codes internally |
| processed by the Linksys IP phone. You can empty the corresponding *code that you do |
| not want to Linksys IP phone to process. |
|
|
| Linksys IP Phone Administrator Guide |
Firmware Version 5.1 |