![](/images/new-backgrounds/1309955/309955247x1.webp)
Chapter 5 Linksys IP Phone Field Reference
Regional Tab
Regional Tab
This section describes the fields for the following headings on the Regional tab:
•Call Progress Tones, page
•Distinctive Ring Patterns, page
•Control Timer Values (sec), page
•Vertical Service Activation Codes, page
•Vertical Service Activation Codes, page
•Outbound Call Codec Selection Codes, page
•Miscellaneous, page
Call Progress Tones
Note None of the following parameters apply to the SPA901.
Field | Description |
|
|
Dial Tone | Prompts the user to enter a phone number. |
| Defaults to |
|
|
Outside Dial Tone | Alternative to the Dial Tone. It prompts the user to enter an external phone number, as |
| opposed to an internal extension. It is triggered by a, (comma) character encountered in |
| the dial plan. |
| Defaults to |
|
|
Prompt Tone | Prompts the user to enter a call forwarding phone number. |
| Defaults to |
|
|
Busy Tone | Played when a 486 RSC is received for an outbound call. |
| Defaults to |
|
|
Reorder Tone | Played when an outbound call has failed or after the far end hangs up during an established |
| call. Reorder Tone is played automatically when <Dial Tone> or any of its alternatives |
| times out. |
| Defaults to |
|
|
Off Hook Warning Tone | Played when the caller has not properly placed the handset on the cradle. Off Hook |
| Warning Tone is played when Reorder Tone times out. |
| Defaults to 480@10,620@0;10(.125/.125/1+2). |
|
|
Ring Back Tone | Played during an outbound call when the far end is ringing. |
| Defaults to |
|
|
Call Waiting Tone | Played when a call is waiting. Defaults to |
|
|
|
| Linksys IP Phone Administrator Guide |
|
| |
|
|
| |||
| Firmware Version 5.1 |
|
|
| |
|
|
|
|