Chapter 4 SPA900 Series LCD Command Reference
8 Voice Mail
•Offset—+/-H:m:s
To enter a / or : use the * (star) key. For offset value, use the * (star) key for + and the # (pound) key for
8 Voice Mail
Shortcut: Setup, 8, voicemail_number, save
To set the number to call voicemail, press Setup and then press 8, or scroll down until the selection is highlighted and press the select soft key.
When the display prompts for the Voice Mail Number, enter the number as if dialing the number. Erase mistaken numbers, one at a time using the delChr soft key. Then press the save button to save the number. After the number is saved, use the mailbox key on the right hand side of the phone (this is the third button up from the Setup button) to dial the mailbox.
9 Network
To view or modify network parameters, press the Setup button and then press 9, or scroll down until Network is highlighted and then press the select soft key. This menu displays the IP network configuration settings.
The following options are available from the Network menu:
•9.1 DHCP
•9.2 Current IP Address
•9.3 Host Name
•9.4 Domain
•9.5 Current Subnet Mask
•9.6 Current Gateway
•9.7 Enable Web Server
•9.8 Non DHCP IP Address
•9.9 Non DHCP Subnet Mask
•9.10 Non DHCP Default Route
•9.11 Non DHCP DNS 1
•9.12 Non DHCP DNS 2
•9.13 Non DHCP NTP Server 1
•9.14 Non DHCP NTP Server 2
•9.15 Multicast Address
•9.16 Enable VLAN
•9.17 VLAN ID
•9.18 CDP
|
| Linksys IP Phone Administrator Guide |
|
| |
|
|
| |||
| Firmware Version 5.1 |
|
|
| |
|
|
|
| ||
