Linksys SPA 900 SERIES Entering a Password through the IVR, Non-Default, Settings will be Lost

Chapter 2 Getting Started

			Using the Interactive Voice Response Interface
Table 2-2 IVR Options (continued)
Manual Reboot of Unit	732668	None	After you hear “Option Successful,” hang
			up. Unit reboots automatically.
User Factory Reset of	877778	Enter 1 to confirm	SPA prompts for confirmation. After
Unit		Enter *(star) to cancel	confirming, you hear “Option
WARNING:		operation	Successful.” Hang up. Unit reboots and
			all “User Changeable” configuration
ALL “User-Changeable”
			parameters are reset to factory default
NON-DEFAULT
			values.
SETTINGS WILL BE
LOST!
This might include
network and service
provider data.
Factory Reset of Unit	73738	Enter 1 to confirm	SPA prompts for confirmation. After
WARNING:		Enter * (star) to cancel	confirming, you hear “Option
		operation	Successful.” Hang up. Unit reboots and
ALL NON-DEFAULT
			all configuration parameters are reset to
SETTINGS WILL BE
			factory default values.
LOST!
This includes network and
service provider data.

Note The items marked with “Requires Password” require a password only if the Administrator password is set.

Entering a Password through the IVR

To input the password using the phone keypad, the following translation convention applies:

–To input: A, B, C, a, b, c—press “2’

–To input: D, E, F, d, e, f—press “3’

–To input: G, H, I, g, h, i—press “4’

–To input: J, K, L, j, k, l— press “5’

–To input: M, N, O, m, n, o—press “6’

–To input: P, Q, R, S, p, q, r, s—press “7’

–To input: T, U, V, t, u, v—press “8’

–To input: W, X, Y, Z, w, x, y, z—press “9’

–To input all other characters in the Administrator account password, press “0’

Note This translation convention applies only to the password input.

	Linksys IP Phone Administrator Guide
Firmware Version 5.1		2-19