![](/images/new-backgrounds/1309955/309955167x1.webp)
Chapter 3 Managing Linksys IP Phones
System Administration
•Force G.726r24
•Force G.726r32
•Force G.726r40
•Force G.729a
When
In addition there are two special codes:
•Referral Services Codes: A list of star codes separated by a vertical bar (), such as *199*09, where entering each member triggers a blind transfer operation. The transfer target number in this case is prepended by the corresponding star code, whereas the blind transfer itself contains the target number only without the star code. Like a normal blind transfer, a referral service code can only be entered when the last call is placed on hold.
•Feature Dial Services Codes: A list of star codes separated by a vertical bar (), where entering each member causes the next outbound call target number to be prepended by the corresponding star code. May be useful for some Service Providers who have their own star codes. These Service Provider star codes can be listed under the Feature Dial Services Codes.
Disabling Services
Services handled locally by the phone can be disabled by the administrator in one or two ways:
•Directly disabling the service in the configurable profile,
•Emptying out the *code associated with the service.
Services that can be disabled (or enabled) by the first method include the following:
•Block Caller ID (including blocking and unblocking, per call and always)
•Block Anonymous Calls
•Do Not Disturb
•Secure Call (including enabling and disabling, per call and always)
•Call Forward All
•Call Forward Busy
•Call Forward No Answer
•Call Back
•Conference Call (no star code)
•Attended Call Transfer (no star code)
•Blind Call Transfer
Services that can be disabled (or enabled) by the second method include any service that has a star code assignment in the Linksys IP phone configuration profile. Note that if a service is enabled, but the corresponding *code is emptied, the service can still be enabled/disabled by the end- user from the phone LCD or the administration web server.
If a service is disabled, any soft key associated with that service is hidden on the LCD. These are: dnd),
|
| Linksys IP Phone Administrator Guide |
|
| |
|
|
| |||
| Firmware Version 5.1 |
|
|
| |
|
|
|
|