11.When a dialog box appears telling you that Cluster Service has started successfully. Click on OK.

12.Close the Add/Remove Programs window.

7.4.16Validating the Cluster Installation

Use the Cluster Administrator snap-in to validate the Cluster Service installation on the first node. Follow these steps to validate the cluster installation.

1.Click on Start.

2.Click on Programs.

3.Click on Administrative Tools.

4.Click on Cluster Administrator.

The Cluster Administrator screen displays. If your snap-in window is similar to the one shown in the screen, your Cluster Service was successfully installed on the first node. You are now ready to install Cluster Service on the second node.

7.4.17Configuring the Second Node

Note: For this procedure, have node one and all shared disks powered on, then power up the second node.

Cluster Installation

7-25

Copyright © 2002 by LSI Logic Corporation. All rights reserved.