Table 6.1 | Hardware Installation Steps (Cont.) | ||
|
|
| |
Step | Action | Additional Information | |
|
|
| |
11 | Replace the computer cover and turn the | Be sure the SCSI devices | |
| power on. | are powered up before, or | |
|
|
| at the same time as, the |
|
|
| host computer. |
|
|
| |
12 | Run the MegaRAID BIOS Configuration | Optional. | |
| Utility. |
|
|
13Install software drivers for the desired operating systems.
6.2.1Step 1: UnpackUnpack and install the hardware in a
•The Driver and Documentation CD, which contains these items:
–The MegaRAID Configuration Software Guide
–The MegaRAID Operating System Driver Installation Guide
–The MegaRAID SCSI
–The software license agreement
–The MegaRAID configuration utilities for DOS
•The warranty registration card
6.2.2Step 2: Power DownTurn off the computer, remove the power cord, then remove the cover. Make sure the computer is turned off and disconnected from any networks before installing the controller card.
Installation Steps |
Copyright © 2002 by LSI Logic Corporation. All rights reserved.