Figure 6.8 Installing the MegaRAID SCSI 320-2 Controller

Bracket Screw

32-bit slots

(3.3 V)

64-bit slots (5 V)

6.2.9Step 9: Connect SCSI Devices

Use SCSI cables to connect SCSI devices to the MegaRAID SCSI 320-1. The MegaRAID SCSI 320-2 has the following connectors:

•Two internal high-density 68-pin SCSI connectors: J7 is for SCSI channel 0, J8 is for SCSI channel 1.

•Two external very high-density 68-pin SCSI connector: J9 is for SCSI channel 0, J19 is for SCSI channel 1.

Installation Steps

6-17

Copyright © 2002 by LSI Logic Corporation. All rights reserved.