6.1.1Optional Equipment

You may also want to install SCSI cables that interconnect the

MegaRAID SCSI 320-2 to external SCSI devices.

6.2Installation Steps

The MegaRAID SCSI 320-2 provides extensive customization options. If you need only basic MegaRAID SCSI 320-2 features and your computer does not use other adapter cards with resource settings that may conflict with MegaRAID SCSI 320-2 settings, even custom installation can be quick and easy.

Table 6.1 lists the hardware installation steps. Each step is described in detail in the following pages.

Table 6.1

Hardware Installation Steps

 

 

 

 

Step

Action

Additional Information

 

 

 

1

Unpack the MegaRAID controller and

If damaged, call your LSI

 

inspect for damage. Make sure all items

Logic OEM support

 

are in the package.

representative.

 

 

 

2

Turn the computer off and remove the

 

 

power cord, and remove the cover.

 

 

 

 

3

Install cache memory on the MegaRAID

32 Mbytes minimum cache

 

card.

 

memory is required.

 

 

 

4

Check the jumper settings on the

See page 6-5for the

 

MegaRAID SCSI 320-2 controller.

MegaRAID SCSI 320-2

 

 

 

jumper settings.

 

 

 

5

Set SCSI termination.

 

 

 

 

6

Set SCSI terminator power (TermPWR).

 

 

 

 

7

Connect the battery harness.

Optional

 

 

 

8

Install the MegaRAID SCSI 320-2 card.

 

 

 

 

9

Connect the SCSI cables to SCSI devices.

 

 

 

 

10

Set the target IDs for the SCSI devices.

 

 

 

 

 

6-2

Hardware Installation

Copyright © 2002 by LSI Logic Corporation. All rights reserved.