5.Repeat step 1 – step 4 to install the device driver on the second system.
After the cluster is installed, and both nodes are in the Microsoft Windows 2000 Advanced Server, installation will detect a SCSI processor device.
6.On the Found New Hardware Wizard prompt, choose to display a list of the known drivers, so that you can select a specific driver.
7.Click on Next.
8.Select the driver that you want to install for the device. If you have a disk with the driver you want to install, click on Have Disk.
9.Select Other devices from the list of hardware types, then click on Next.
10.Insert the disk containing the driver into the selected drive and click on OK.
11.Select the processor device and click on Next.
12.On the final screen, click onFinish to complete the installation.
13.Repeat the process on the peer system.
7.3.2Network RequirementsThe network requirements for clustering are:
•A unique NetBIOS cluster name
•Five unique, static IP addresses:
–Two addresses are for the network adapters on the internal network
–Two addresses are for the network adapters on the external network
–One address is for the cluster itself
•A domain user account for Cluster Service (all nodes must be part of the same domain.)
•Two network adapters for each
Installing and Configuring Clusters |
Copyright © 2002 by LSI Logic Corporation. All rights reserved.