Marantz RC9200, RC5200 manual Introduction, Cloning All Your Existing Remotes

Customizing Your RC9200/5200

1.

2.

User Guide

Introduction

It is best to proceed with customizing in several stages. The first stage is to teach all of your existing remote codes to the RC9200/5200. The second stage is to practice using your home theater system with the RC9200/5200. As you gain familiarity with your system, you’ll notice that many operations in a home theater require several steps. In the third stage of customization, you will record multiple step operations as either a “Macro” that you can play back with one button push or as a list of numbered steps recorded in a “Help List” device group.

In the next few pages you’ll find step by step guidelines on each of the three stages. When a more detailed explanation can be found in the Reference section, we’ve noted the page.

Cloning All Your Existing Remotes

1Gather all of your remote controls in front of you.

2Play with all of the example device groups. Compare the device groups with your existing remote controls. Can you use any as templates for non-Marantz components?

3Use DEL mode to delete all of the device groups that you don’t like (see page 40).

4Use ADD mode to add the device groups for each Marantz component (see page 35-40).

When you are prompted to add with or without RC codes, choose WITH RC CODES.

5Use ADD mode to add a device group for each non-Marantz component (see page 38).

Choose WITHOUT RC CODES.

6Switch to LEARN Mode to evaluate the panel layouts of the new

18