7.
Customizing Your RC9200/5200
Macros From Your Home Buttons
It is possible to program a macro to occur when you select a device (the macro will occur both when you press a home button AND when you select the device from the pull down Device menu).
To program:
1Navigate to the Device side of the RC9200/5200.
2Tap the mode button and press the LEARN mode button.
3Tap the Device Tab and reveal the Device Menu.
4While bracing the RC9200/5200 with your right hand, press and hold the Backlight button with a left hand finger.
5Press and hold the Left hard button with your left hand thumb.
6While still bracing, pressing and holding everything, use a right hand finger to select the device from the Device Menu.
7The EDIT window appears with the name of your Device at the top of the window.
8Program your macro following steps 10 through 15 on the previous page.
Note | In use, you can select a device without issuing the macro by |
| revealing the Device Menu, then pressing and holding the left |
| hard key labeled NO IR, then selecting the device. Otherwise, |
| every time you select the device from home or select it from the |
| device menu, the macro will be sent. |
User Guide |
27
