ELECTRICAL POWER
Vehicle must have a 12 volt dc electrical system capable of supplying 65 amperes of electrical power to the Lift for each operating cycle.
SAFETY INTERLOCK SYSTEM
Vehicle must have an FMVSS 403 compliant, onboard Safety Interlock System that interfaces with the Wheel- chair Lift interlock signal. Interlock signal may be V+ or
•Prevent the Lift from deploying when vehicle is in drive or reverse.
•Prevent the vehicle from moving when the Lift is deployed.
•Prevent the Lift from disabling vehicle if the Lift signals a deployed condition when the vehicle is moving.
For the applicable interlock electrical connections on the Lift, refer to the ELECTRICAL SYSTEM DIAGRAM in this manu- al. For more information about the interlock connections, call:
MAXON Lift Corp. Technical Service at (800)
LIGHTING
Public use vehicle manufacturers are responsible for complying with Lift lighting requirements stated in Fed- eral Motor Vehicle Safety Standard No. 404, Platform Lift Installations in Motor Vehicles (49 CFR 571.404).
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
9 | PATENTS PENDING |
