Maxon Telecom WL7-VERS. C-1K installation instructions Floor Position Adjustment Mandatory

FLOOR POSITION ADJUSTMENT (MANDATORY)

NOTE: Do the following procedure to ensure the inboard rollstop rests on threshold plate and lines up approximately with edge of base plate.

11921 Slauson Ave. Santa

1.Unfold the platform until the lights illuminate at floor level or raise the platform to floor level as shown in FIG. 52-1A.

EDGE OF

THRESHOLD INBOARD

PLATE ROLLSTOP

EDGE OF

BASE PLATE

PLATFORM

LIGHT

Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

INBOARD ROLLSTOP LINES

UP WITH BASE PLATE

FIG. 52-1B

PLATFORM AT FLOOR LEVEL

(LH SIDE SHOWN)

FIG. 52-1A

2.Inspect the threshold plate. The edge of the inboard rollstop should line up with the edge of the base plate as shown in FIG. 52-1B.

PATENTS PENDING 52