Maxon Telecom WL7-VERS. C Checking Hydraulic Fluid Level, Hydraulic Fluid Level LH Pump Shown

CHECKING HYDRAULIC FLUID LEVEL

!CAUTION

Keep dirt, water and other contaminants from entering the hydraulic sys- tem. Before opening the hydraulic fluid reservoir filler cap, drain plug and hydraulic lines, wipe off contaminants that can get in the openings. Also, protect the openings from accidental contamination.

1.Check the hydraulic fluid level in reservoir as follows. With Lift in STOWED position, fluid level should be as shown in FIG. 39-1.

PUMP

COVER

INSPECTION

SLOT

RESERVOIR 2”

HYDRAULIC FLUID LEVEL

(LH PUMP SHOWN)

FIG. 39-1

2.If needed, add fluid to the reservoir as follows. Unbolt the pump cover as shown in FIG. 39-2.

PUMP COVER

SCREWS

UNBOLTING/BOLTING PUMP COVER

(LH PUMP SHOWN)

FIG. 39-2

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

39 PATENTS PENDING