MicroNet Technology SP5054A/S, SP5052A/S user manual 2.11 sip

	change the time waiting for dial tone.
-rba	set how many rings the gateway will answer the call
	(1 ~ 5 rings)
-eod	End of dial.(Enable:1 / Disable:0)
-connect	The unit will send the connect message to the IP side
	automatically. This function just supports the
	one-stage-dialing function.

2.11[sip]

This command is to configure SIP related parameters.

---------------------------------------------------------------

usr/config$ sip

SIP stack information and configuration Usage:

sip [-mode pxmode]

sip [-px address] [-px2 address] [-outpx address]

sip [-pxport number] [-px2port number] [-outpxport number] [-expire t1] [-prefix prefixstring] [-line number]

sip -print
-print	Display SIP stack information and configuration.
-mode	Configure as Peer-to-Peer mode:0/Proxy mode:1/Gatway:2.
-px	Primary Proxy server address. (IPv4 address or dns
	name)
-px2	Secondary Proxy server address. (IPv4 address or dns
	name)
-pxport	Proxy server port.	(the port of proxy)
-px2port	Secondary Proxy server port. (the port of Secondary
	proxy)
-outpx	OutBound Proxy server address. (IPv4 address or dns
	name)
-outpxport	OutBound Proxy server port. (the port of OutBound
	proxy)
-prefix	Specify prefix string, use it when UserID contains
	Alphabets (if UserID uses numerals, specify as null)
-line1	Line 1 is E.164 number of L1.

32